How to remove ignition lock cylinder without key ford with manual
So How to remove ignition lock cylinder without key ford we make it and here these list of best for your ideas and information purpose regarding the How to remove ignition lock cylinder without key ford as part of How To Do exclusive updates collection. So, take your time and find out the best How to remove ignition lock cylinder without key ford images and pictures posted here that suitable with your needs and use it for your own collection and personal use.The lock cylinder is secured to the lock assembly by a button on the bottom of the housing and two screws on top of the lock assembly. (3mm) diameter wire pin or a small drift, depress the lock cylinder retaining pin through the access hole in the upper steering column shroud (under the ignition lock cylinder) while pulling out on the lock cylinder.
Hello, the only way to get the lock out with out being able to turn it to the on position is to drill out the tumblers and then turn it to the on position and remove it. The lock tumblers that keep it from turning will also keep it from pulling out unless they are held down either by a key or by the housing (ie: It then slides right out of the dash.
Starting in 1969 the lock cylinder was moved to the steering column.
I know the correct way to remove the ignition lock cylinder is to turn it to a specific point using the key and push the release button. Using 1/8 drill bit, drill out lock cylinder retaining pin. Using the regular key in the ignition, tap lightly on the end of the key with a medium size screwdriver handle and try to turn the key as you're tapping. You needed the ignition key in order to rotate the lock cylinder to acc.
